Knowledge

Build an Inspection and Test Plan with Clear Ho...

A machined surface is ready for inspection, but coating will soon make part of that surface harder to examine. The order says the buyer may witness inspection, yet it does...

Residual Magnetism After Inspection: What to As...

A statement that a part was “demagnetized after MPI” is not a residual-field record. It does not show where the part was measured, which axis the sensor followed, what instrument...

Ask for Rubber-to-Metal Bond Evidence, Not Just...

“Pull strength” can hide more than it reveals in a rubber-to-metal bond report. The value may come from tension, peel, shear, or a durability configuration. It may represent total force,...

Reverse Engineering a Worn Part Without Copying...

A worn component is evidence of both its manufacture and its service history. Its surfaces may contain the original form, running clearance, plastic deformation, corrosion, fracture and accumulated wear at...

Choose Between In-Process and Pre-Shipment Insp...

Suppose heat treatment for an order of undercarriage parts is performed by a subcontractor, but packing has not started. An inspection now can check evidence created around that process while...

Calculate Chargeable Weight from the Packed Par...

A chargeable-weight check can fail even when every number looks plausible. For example, dividing a volume stated in cubic centimetres by an LCL factor stated in kilograms per cubic metre...